您好,欢迎访问无锡【家佳旺】搬家公司!公司常备大中小型各类货车,在无锡地区承接厂房搬家,公司搬迁,长途搬家,居民搬家等服务!

无锡搬家公司

专业服务 放心托付!

搬家收费标准

价格合理 无乱收费!

全国咨询热线

0510-83110898

无锡【家佳旺】搬家公司

无锡搬家公司对空调拆装步骤有哪些?

发布时间:2019-08-29人气:70

现代家庭,空调是必备的家用电器,所以搬家时是个不能忽视的问题。一般情况下,空调使用年限较长,我们是不建议搬家时搬运空调的,因为,拆装空调会影响空调的使用寿命的,而且,在拆装空调的过程中也会产生额外的费用。如果,客户有需求的话,我们是可以提供空调拆装服务的,无锡搬家公司有签约的专业空调拆装人员,可以,保证空调拆装后不受影响的正常使用。

In modern families, air conditioning is a necessary household appliances, so moving is a problem that can not be ignored. Generally speaking, air conditioning has a long service life. We do not recommend moving air conditioning, because disassembly and assembly of air conditioning will affect the service life of air conditioning, and there will be additional costs in the process of disassembly and assembly of air conditioning. If the customer needs, we can provide air conditioning disassembly and assembly services. Wuxi Moving Company has contracted professional air conditioning disassembly and assembly personnel, which can ensure the normal use of air conditioning unaffected after disassembly and assembly. 无锡搬家公司拆装空调步骤:

Dismantling and assembling air conditioning steps of Wuxi Moving Company:

拆机:

Dismantling machine:

1、收氟 开机打制冷,压缩机工作后关闭高压阀运转一分钟,关闭低压阀,停机。拔掉电源插头(切记)。

1. Receive fluorine and start refrigeration. After the compressor works, close the high-pressure valve and run for one minute. Close the low-pressure valve and stop the machine. Pull out the power plug (remember).

2、拆开室外机铜管接头,拆开室外机电线接头(记住线的顺序)。

2. Remove the copper pipe connector of the outdoor machine and the electrical wire connector of the outdoor machine (remember the sequence of the wires).

3、拆下室内室外机。

3. Remove the indoor and outdoor machines.


装机:

Installation:

1、在预定位置钉好室内机的挂盘(必须保证水平),将管穿出后挂好室内机。

1. Hanging tray of indoor machine should be nailed in pre-positioning position (level must be guaranteed). Hang indoor machine after pipe is put through.

2、根据管的长度确定室外机的位置,室外机也要保证水平。

2. Determine the location of outdoor machine according to the length of pipe, and ensure the level of outdoor machine.

3、接好高低压管,先打开高压阀,然后松低压管锁母(排出管路中的空气),听到有出气的声音8~10秒后拧紧该锁母,打开低压阀,按顺序接好电线。

3. Connect the high and low pressure pipe, first open the high pressure valve, then loosen the low pressure pipe lock mother (discharging the air in the pipeline). After hearing the sound of exhaust for 8-10 seconds, tighten the lock mother, open the low pressure valve, and connect the wires in sequence.

4、接通电源,试机。检查管路接头(锁母处)有无泄漏。

4. Connect the power supply and test the machine. Check whether there is leakage in pipe joint (lock mother).

注意事项:旧空调的铜管韧性较差,容易挝成死弯。

Notes: Copper tubes of old air conditioners have poor toughness and are easy to bend in Laos.

辛苦整理!转载请注明来自 http://510bj.cn/show.asp?id=163

你觉得这篇文章怎么样?

0 0
网友评论

管理员

该内容暂无评论

美国网友

推荐资讯